|
Post by socalhunter on Sept 4, 2013 13:02:31 GMT -5
Hey everyone I'm looking for a 9/32 pin chuck mandrel does anyone have one I can try or buy thanks keith. Socalhunter.
|
|
|
Post by John on Sept 4, 2013 15:44:12 GMT -5
I wish I had a spare but I don't. I don't use a pin mandrel in 9/32. I use a tapered one. Try the hardware store and see if they have any rod that is 1/4" and put it in your collet and use a file to taper it down to where it fits. Then you can get the length you want and a better fit for you drill bit. If my son drills a blank and puts it on my lathe it's loose and when I drill using my bit it's a nice fit. You'd think they would all be the same but they don't seem to be.
JOhn
|
|
|
Post by alscalls on Sept 4, 2013 20:41:20 GMT -5
I made mine
|
|
|
Post by socalhunter on Sept 5, 2013 17:45:07 GMT -5
ok thanks for the advice keith
|
|